17.25.050 Contents of final plat and final short plat.
The following information shall be shown on a final plat or final short plat:
(1) Name of subdivision and Department file number for final plats or Department file number for final short plats;
(2) Location by section, township and range, and by legal description;
(3) The signature and seal of the land surveyor;
(4) Survey map requirements as specified in Chapter 332-130 WAC and Chapter 58.09 RCW;
(5) Boundary of plat or short plat based on relative accuracy procedures or field traverse standards, and meeting or exceeding those standards specified in WAC 332-130-090;
(6) Exact location, width and name of all streets within and adjoining the plat or short plat, the address of each lot, and the exact location and widths of all alleys. The naming of a street shall conform to the City’s process for naming streets;
(7) Courses and distances to the nearest established street lines or official monuments that shall accurately describe the location of the plat or short plat;
(8) Municipal, township, County or section lines accurately tied to the lines of the plat or short plat distances and courses;
(9) All easements for rights-of-way, access and utility easements, NGPA areas, slope easements, flood elevations, wetland buffers, and building setback boundary lines (BSBL);
(10) Lots designated by number on the plat or short plat within the area of the lot, and tracts similarly designated by letter. Each tract shall be clearly identified with the ownership, purpose and maintenance responsibility;
(11) Blocks in numbered additions to plats bearing the same name may be numbered or lettered consecutively through the several additions;
(12) Accurate location of all existing and proposed permanent control monuments at each corner of the subdivision or short subdivision consistent with RCW 58.17.240 and at all road intersections and curve control points that fall within the pavement;
(13) A traverse line established along the shore not more than 20 feet landward of the ordinary high water line when a subdivision or short subdivision borders on a body of water. This line shall be labeled “plat traverse line” or “short plat traverse line,” as applicable, on the final plat or short plat documents;
(14) Accurate boundary delineation for any areas to be dedicated or reserved for public use, along with the purposes of the use indicated thereon, and the accurate delineation of any areas to be reserved by deed covenant for common uses of all property owners;
(15) The boundary description of the property being subdivided or short subdivided matching the description recorded in the most recent real estate transfer document encompassing the property. If the description is incorrect, a true and exact description shall be shown upon the plat or short plat together with the original description. The original description shall be labeled “original description” and the true and exact description shall be labeled “surveyor’s corrected description.” The surveyor’s corrected description shall be preceded by the verbiage: “The intent of the original description is to encompass all of the property described within the surveyor’s corrected description”;
(16) Dedication with notarized acknowledgments by all parties having an ownership interest, as required by RCW 58.17.165 and 19A.04.230, acknowledging the adoption of the plat and the dedication of streets and other public areas. Dedications by corporations shall include corporate acknowledgment and dedications by individuals shall include individual acknowledgment;
(17) Restrictions, title encumbrances and notes required by the conditions of approval;
(18) Certification by a land surveyor to the effect that the plat or short plat correctly represents a survey made by the surveyor, or under the surveyor’s direction, and that the existing monuments are located as shown on the final plat or final short plat;
(19) Approval and signature blocks for the Department, the County Office of Records and Elections;
(20) Approval of the City Manager or Director, as applicable, to the extent such approval is required; and
(21) Recording certificate required for the signature of the King County Records and Elections Division. (Ord. 13-19 § 7; Ord. 06-17 § 5 (Exh. C); Ord. 53-02 § 2 (19A.16.050))