(1) A final plat or final short plat shall be prepared on forms 18 inches by 24 inches in size, allowing for a two-inch border on one of the 18-inch sides, to allow for binding, and one-half-inch borders on the other three sides. The two-inch border will typically be on the top or left side depending on the configuration of the drawing.

(2) Forms shall be printed with materials acceptable for filing as specified in WAC 332-130-050 and be formatted consistent with forms provided by the Department. (Ord. 13-19 § 7; Ord. 53-02 § 2 (19A.16.060))